~NAXC~

File Content: `tuned.conf`

#
# tuned configuration
#

[main]
summary=Base CloudLinux latency-performance profile - NOT FOR DIRECT USE, use cloudlinux-latency-performance-cgv1 or cloudlinux-latency-performance-cgv2 instead
include=throughput-performance

[bootloader]
cmdline = swapaccount=1

[cpu]
governor=performance
energy_perf_bias=performance
min_perf_pct=100

# The alternation of CPU bound load and disk IO operations of postgresql
# db server suggest CPU to go into powersave mode.
#
# Explicitly disable deep c-states to reduce latency on OLTP workloads.
force_latency=1

[vm]
transparent_hugepages=never

[sysctl]
kernel.numa_balancing = 1
vm.dirty_ratio = 40
vm.dirty_background_ratio = 10
vm.swappiness=10
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_timestamps = 1
# Increase kernel buffer size maximums.  Currently this seems only necessary at 40Gb speeds.
#
# The buffer tuning values below do not account for any potential hugepage allocation.
# Ensure that you do not oversubscribe system memory.
#net.ipv4.tcp_rmem="4096 87380 16777216"
#net.ipv4.tcp_wmem="4096 16384 16777216"
##
# Busy polling helps reduce latency in the network receive path
# by allowing socket layer code to poll the receive queue of a
# network device, and disabling network interrupts.
# busy_read value greater than 0 enables busy polling. Recommended
# net.core.busy_read value is 50.
# busy_poll value greater than 0 enables polling globally. 
# Recommended net.core.busy_poll value is 50 
net.core.busy_read=50
net.core.busy_poll=50

# TCP fast open reduces network latency by enabling data exchange
# during the sender's initial TCP SYN. The value 3 enables fast open
# on client and server connections.
net.ipv4.tcp_fastopen=3

####
vm.zone_reclaim_mode=0
vm.force_scan_thresh=100
## from Volkov
kernel.pid_max=4194303


[scheduler]
sched_min_granularity_ns = 10000000
sched_wakeup_granularity_ns = 15000000

[disk-vm]
type=disk
devices = vd*
elevator = mq-deadline

[disk-sas]
type=disk
devices = sd*
elevator = mq-deadline

[disk-nvme]
type=disk
devices = nvme*
elevator = none
readahead = 0
File Content: tuned.conf

File Content: `tuned.conf`
